• Welcome, Guest! We hope you enjoy the excellent technical knowledge, event information and discussions that the BMW MOA forum provides. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please click the 'Log in' button above and enter your BMW MOA username and password.

    If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the discounts and benefits the BMW MOA offers?

  • Beginning April 1st, and running through April 30th, there is a new 2024 BMW MOA Election discussion area within The Club section of the forum. Within this forum area is also a sticky post that provides the ground rules for participating in the Election forum area. Also, the candidates statements are provided. Please read before joining the conversation, because the rules are very specific to maintain civility.

    The Election forum is here: Election Forum

2004 R1150RS needs connector for heated grip

M

MOONDOG59

Active member
Destroyed the female connector for the left heated grip coming off of the grip into the main harness. Who are these made by and is there a pin removal tool available so it doesn't happen again. anybody got a part number? I checked MaxbMW but didn't see anything. The tiny screw driver or pin doesn't work. The new grip has the female pins in place.
 
Last edited:
When I did the heated grip conversion on my R850R I was able to order one of these through my local BMW dealer. It's one of the rare reasonably priced parts!

https://www.shopbmwmotorcycles.com/...QYWdlJmE9Ym13LW1vdG9ycmFkJm89cjg1MHImeT0xOTk3

It's for the heated grip side of the connector -- not sure if that's the one you're referring to.

When removing the individual pins inside the connectors, I just used a safety pin (the kind you'd use for sewing), and it worked well enough for me. I just had to make sure to gently bend the securing tabs back into place when reinstalling the pins.
 
Most connectors of that vintage are made by AMP exclusively for BMW.
The part you are looking for is 61 13 1 357 903 PLUG HOUSING - 2-POLIG (from 12/02) 2 NANLA
Appears to be no longer available.

You may want to see if the earlier 4 pole unit is retrofitable - I suspect it may be with some modification.
61 13 1 361 706 PLUG HOUSING - 4-POLIG (to 12/02) 1 $2.09
 
You must log in or register to reply here.

Similar threads

F
Trouble-shooting heated grips
Replies
1
Views
1K
akbeemer
akbeemer
S
88 R100RT Heated Grips
Replies
6
Views
1K
lkchris
lkchris
88bmwjeff
How Do You Remove Heated Grips w/o Cutting Wires?
Replies
10
Views
1K
stevenrankin
stevenrankin
pauls1150
Adding Parallel Battery Cables
Replies
7
Views
2K
mikegalbicka
mikegalbicka
A
2004 R1150RT: iABS issues, Bubbles in the Funnel tool...
Replies
6
Views
2K
adriancw
A
Back
Top