I have a 1982 Velorex 562 on a 1976 BMW R75/6. It has an 18” wheel. Everything I’ve read says it should have a 16” wheel. The original owner and rigger was Perry Bushong who was known for great handling sidecar rigs. But there were a couple owners after him so I don’t know who installed the wheel. The bike seems to have about an inch too much lean out so I think the 16” wheel is what it needs. Does anyone have any advice on this? And does anyone have a used 16” wheel for sale? It handles well but the wheel is really tight in the wheel well. Thanks in advance! 14D3BF82-E2B6-478C-9979-474DD16C9C42.jpg