• Welcome, Guest! We hope you enjoy the excellent technical knowledge, event information and discussions that the BMW MOA forum provides. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please click the 'Log in' button above and enter your BMW MOA username and password.

    If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the discounts and benefits the BMW MOA offers?

  • Beginning April 1st, and running through April 30th, there is a new 2024 BMW MOA Election discussion area within The Club section of the forum. Within this forum area is also a sticky post that provides the ground rules for participating in the Election forum area. Also, the candidates statements are provided. Please read before joining the conversation, because the rules are very specific to maintain civility.

    The Election forum is here: Election Forum

Speedo and Tach cables stuck R75/6

spencer_p

New member
Hi there. I was trying to remove my dash to repair a broken trip reset knob, and I hit a snag. It seems the threaded studs, where my speedo and tach cables attach to the back of the dash, are loose. So, when I try to loosen either cable, the stud just spins. Hence the cables are stuck (for now). Has anyone encountered this before? Any suggestions to hold those studs so I can unscrew the tach and speedo cables? Thanks!
 
I was replacing the cables on my /6 anyway, so I cut the collars with a Dremel and split them with a wedge in the kerf to brake them free of the housing. Kind of an adaptation of how one removes stuck exhaust nuts.
 
Closing the loop here, a small needle-nose Vice Grips worked to hold the threaded stud while I unscrewed the cables.
 
Thanks

Thanks for the follow up, it is nice to have someone tell us how things worked out or what worked for them. St.
 
Back
Top