sundance71
New member
Good evening everyone.
I have an 04 1150RT that I've been working on and I started it up no problem about a month ago. I put a Delkevic slip on pipe on this weekend and a new O2 sensor. I went ahead and pulled the pink coding plug and reinstalled it to reset the motronic and did the TPS reset afterwards.
I went to start it afterwards and it cranks but wont fire. I mean like not even a stutter. Like I said minimal changes between now and a month ago.
Plugs are new, gas is good, good compression, etc. Fired right up without a hitch before.
Did something in the Motronic get disabled. I had read a post where it was immobilized through the GS-911 but I didn't use any scan tools on it.
Any thoughts would be much appreciated.
Thanks
Chris
I have an 04 1150RT that I've been working on and I started it up no problem about a month ago. I put a Delkevic slip on pipe on this weekend and a new O2 sensor. I went ahead and pulled the pink coding plug and reinstalled it to reset the motronic and did the TPS reset afterwards.
I went to start it afterwards and it cranks but wont fire. I mean like not even a stutter. Like I said minimal changes between now and a month ago.
Plugs are new, gas is good, good compression, etc. Fired right up without a hitch before.
Did something in the Motronic get disabled. I had read a post where it was immobilized through the GS-911 but I didn't use any scan tools on it.
Any thoughts would be much appreciated.
Thanks
Chris