• Welcome, Guest! We hope you enjoy the excellent technical knowledge, event information and discussions that the BMW MOA forum provides. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please click the 'Log in' button above and enter your BMW MOA username and password.

    If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the discounts and benefits the BMW MOA offers?

Bar setbacks or risers

BluBeast

Nomadic
Does anyone know of a product that will bring my handlebars closer to me, as well as raise them? I put the Wunderlich 20mm risers on my 2010 F650GS but it's still not enough. This morning, I tilted the handlebars as far down as possible but the very end of the bars actually taper down anyway and sets my arms too far forward and down. I've still been getting shoulder blade pain, although the 20mm risers helped tremendously. Also, I don't have a windscreen other than the stock one (I just love the naked bike thing and don't mind wind). The wind seems to hit me on the chest and then over my helmet, but I'm wondering if the shoulder pain is exacerbated by me having to hold on tighter. I don't have death grip, but definitely get more pain in the throttle side shoulder blade.

I'm considering getting this product, although I don't know if it will fit a 2010:

http://www.mv-motorrad.de/lshop,showdetail,2004g,e,,,901437,,,.

The New MV Tube Style Handlebar Adapter BMW F650GS 2008 Twin with ABS - 901437

Opinions? Experience, anyone?
 
The bar risers that I have on my F-800GS are from ROX http://www.roxspeedfx.com/cgi-bin/cart/showitems.cgi?subcat_id=297 . Model # 3R-P2PPL . They allow adjustment front to back and the bars to move up and down. The drilled interior holes allow for some extra accessories. BTW you don't have to replace the front brake line but I did at the scheduled Brake fluid change. The brake system was going to be open anyway. Got the new one from http://www.spieglerusa.com/ . I ordered it 2 inches longer. HTH Gary
 
I just sent them an email. I'm pretty sure my bars are 7/8", so we'll see if they have a fit. Thx Gary.
 
A throttle rocker may also help ease your shoulder pain.

http://throttlerocker.com/

You also have to get used to leaning forward in your seat and gripping with your thighs to aleviate some of the weight your putting on your arm/shoulder.
 
I have one. I just don't put it on until I hit open road. I live in the san francisco bay area, too curvy to have one permanently mounted on my throttle for safety reasons. But thx for the suggestion.
 
$340 ... :scratch seems a bit steep.

The Rox would be less expensive and give most adjustability ... which you might not need...
but I gotta admit I like the looks of thos better!

I have ABS on my bike, which has different brake hose than the non-ABS model, but I can not imagine being able to use the stock brake line with either the Rox or this unit...
 
$340 ... :scratch seems a bit steep.

The Rox would be less expensive and give most adjustability ... which you might not need...
but I gotta admit I like the looks of thos better!

I have ABS on my bike, which has different brake hose than the non-ABS model, but I can not imagine being able to use the stock brake line with either the Rox or this unit...

On my F800GS you don't have to get a new brake line. If you are using the full articulation of the mounts the stock line will be tight. There has been a bunch of methods to getting a little slack from reversing the ends to slightly bending the tube at the banjo mount. I chose the new line.

Found this:

http://store.bobsbmw.com/ProductDetails.asp?ProductCode=4901-901437

We'll see which one fits....and if there are two that fit, all the better!

That set-up from bobs looks real slick. From what I can tell the mounting will be easier as with the rox. In the most rearward positing (with the rox) you have to be creative in tightening the bolt that is closest to the seat. Don't forget to let us know how you make out. Gary
 
They look real good. Sort of a level up from the rox. I look forward to the pictures. Gary
 
Damn...I wish I would have seen that sooner! If the other one doesn't work, I'll keep it in mind. Creative cycles said that the one I ordered wouldn't need a longer brake line, since they include an extension. The technician will have to reroute the cable but it should be long enough. I'm also wondering if my Wunderlich tank bag is going to get in the way. We'll see. There's always the option of rolling the handlebars a bit, too.
 
I posted a couple pictures online. Front and back of the package. Since I couldn't figure out how to post the damn pictures here, I just sent the link for the whole album..

The package contains far more than just the risers and bolts. I'll open it up at the dealership and snap a few more shots.

http://gallery.me.com/moonseal#100095] http://gallery.me.com/moonseal#100095
 
Last edited:
I posted a couple pictures online. Front and back of the package. Since I couldn't figure out how to post the damn pictures here, I just sent the link for the whole album..

The package contains far more than just the risers and bolts. I'll open it up at the dealership and snap a few more shots.

http://gallery.me.com/moonseal/100048

It's ok, your making progress. Pictures here are a one at a time deal. If your bringing them in from photo hosting sight you can string them together. Gary
 
I just opened the package and shot the installation instructions and parts included for anyone that wants to see. The photos can be downloaded and enlarged. The install will be done tomorrow morning...and I will post photos after. My shoulder blades are very excited!

Riser%20parts.jpg
 
Last edited:
The install took 2.75 hours, mostly because the bracket and bolt to hold the brake line extender (see picture) were interfering with the frame. The technician had to saw down the bolt, and move it around on the bracket to find a position that worked. After he got that squared away, and rerouted the cables (still original stock brake and clutch lines). The risers are completely installed now, and everything is operational, but the stretch is tight for the front brake line, even with the extender. I'll have to keep an eye on it. The handguards are close to hitting my tank, but they're okay....no rotating the handlebars to tweak my control positions! All in all, the parts are good quality and the setback is substantial....exactly what I was looking for. By the way, the tech told me that the instructions were basically useless. Good thing I took it to the BMW shop.

web.jpg


web.jpg


web.jpg


web.jpg
 
Last edited:
Back
Top