rxcrider
New member
I rescued a friend's 1988 R100GS from the highway today with a failed front U-joint on the driveshaft. I just pulled it apart and there is grease everywhere like someone pulled out the front swingarm pivot pins and packed the swingarm / driveshaft with grease from both sides. Is this normal? The pivot pins and locknuts also had grease on them and were removed easily without heat. If it were an oil head I would know that is wrong, but this is my first dive into an airhead with the paralever and I don't have a manual on hand yet.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk