95 K75S ABS - Where does this part go?

drneo66 · Apr 16, 2014

I am working on putting everything back together after a transmission spline lube and I happen to find this 1 inch by .75 inch rubber block on the floor. It has a channel in it as if it slides into some special place... I looked through my parts manual and can't seem to find it anywhere.

pglaves · Apr 16, 2014

Memory is vague here but I clearly remember the part - just not exactly where it goes. But it slides into a somewhat triangular cutout in one of the housings before a second piece bolts up against that flat third side. I'm thinking bellhousing but am not positive.

Lee to the white courtesy phone.

98lee · Apr 16, 2014

That goes in a notch in the bellhousing just to the right of the upper left transmission mounting bolt (just below the starter).

:dance

drneo66 · Apr 18, 2014

Thanks Gents!! For anyone else, you do have to move the starter out of the way. Seems weird to have a big hole in the transmission case...

95 K75S ABS - Where does this part go?

drneo66

Active member

pglaves

#13338

98lee

3 Red Bricks

drneo66

Active member

Similar threads

Forum statistics

Share this page