Results 1 to 15 of 17

Thread: Need help reattaching a K75S front wiring harness

Hybrid View

  1. #1
    Registered User twofastdogs's Avatar
    Join Date
    Jun 2006
    Location
    Minneapolis
    Posts
    151

    Need help reattaching a K75S front wiring harness

    Hi, all.

    A friend contacted me asking how to reattach the his K75S's wiring harness back onto the bike. I swung by and took a look at it. My best guess is that there's a spot on the fairing support, near the forks. That's about all I could find. I tried to search on the forums, but came up empty.

    Here's a couple pics. In the first one, you can see, what I believe is, where the harness attaches to the bike. It's to the left of the fork boot.





    1. Am I right about this?
    2. Is there a trick to getting it back up there without removing the fairing?

    TIA.
    -K
    Kevin Kocur, #58836
    2001 F650GS, 1995 R1100GS, 1988 K100RS
    BMW Motorcycle Owners Club of Minnesota 2014 President and Rally Tear Down Chair

  2. #2
    3 Red Bricks
    Join Date
    Jan 2007
    Location
    Pleasanton, Ca.
    Posts
    3,481
    Kevin,

    The main harness makes a hard left at the left front corner of the gas tank and runs along the inside of the left fairing. There is a spot where the grommet that is on the harness wire ties to the inside of the left fairing.


    Let me know if you need photos. I might be able to get you some in the next couple of days.




    Greyhounds?




    LONG MAY YOUR BRICK FLY!

    Ride Safe, Ride Far, Ride Often

    Lee Fulton Forum Moderator
    3 Marakesh Red K75Ss
    Mine, Hers, Spare

  3. #3
    Registered User twofastdogs's Avatar
    Join Date
    Jun 2006
    Location
    Minneapolis
    Posts
    151
    Thanks, Lee. I will pass that along.

    Greyhounds, yes. I figure that I've had a dozen or so through my place. Three adopted and the rest were fosters. At one time, I was dating a woman and each of us had two Hounds. Spending the weekends together, the houses got a bit...crowded. But everyone got along well.
    -K
    Kevin Kocur, #58836
    2001 F650GS, 1995 R1100GS, 1988 K100RS
    BMW Motorcycle Owners Club of Minnesota 2014 President and Rally Tear Down Chair

  4. #4
    Happily Bent dieselyoda's Avatar
    Join Date
    Mar 2013
    Location
    Winnipeg, MB, Canada
    Posts
    626

    If you can wait, I am about a week away from assembling my K75S harness.

    I can take pictures as I put it together. I didn't take pictures when I took it apart but I used a "White-out Pen" and colored ties to mark everything for re-assembly.

    Right now, I'm not having a joy-joy moment with a sticking throttle.

    But, you gotta love folks that love critters.
    1997 R1100RT (Restored Basket Case) , 1981 KZ 440 LTD (Restored Basket Case)
    1986 K75S(the beutch), 1993 K1100RS (blown engine), 1997 Chev Short Box (4x4 with an LT1)
    "You can easily judge the character of a man by how he treats those who can do nothing for him."

  5. #5
    3 Red Bricks
    Join Date
    Jan 2007
    Location
    Pleasanton, Ca.
    Posts
    3,481
    Quote Originally Posted by dieselyoda View Post

    Right now, I'm not having a joy-joy moment with a sticking throttle.
    Did you check the throttle friction screw? Or a bad cable?



    LONG MAY YOUR BRICK FLY!

    Ride Safe, Ride Far, Ride Often

    Lee Fulton Forum Moderator
    3 Marakesh Red K75Ss
    Mine, Hers, Spare

  6. #6
    Happily Bent dieselyoda's Avatar
    Join Date
    Mar 2013
    Location
    Winnipeg, MB, Canada
    Posts
    626

    Cable good, mechanism, rack and pinion cleaned and lubed.

    Quote Originally Posted by 98lee View Post
    Did you check the throttle friction screw? Or a bad cable?



    Throttle Friction Screw????????? Is that like a muffler bearing or using summer air for your tires? Or is it way worse, like a loose nut behind the handlebars?

    I can't find a description for it anywhere. The throttle snaps open and closed very nicely. The cable is loose. The rack and pinion moves without the aid of 25 year old nasty grease. There isn't any screws on the grip to adjust and I loosened off the master cylinder to make sure I wasn't binding the cover when I installed it.

    All this to change a torn grip........Looks like pictures are next week. Not that getting this thing back together is a priority, -18C with 10 inches of snow expected tonight. I need to drink beer and fix my snowblower, again.
    1997 R1100RT (Restored Basket Case) , 1981 KZ 440 LTD (Restored Basket Case)
    1986 K75S(the beutch), 1993 K1100RS (blown engine), 1997 Chev Short Box (4x4 with an LT1)
    "You can easily judge the character of a man by how he treats those who can do nothing for him."

  7. #7
    3 Red Bricks
    Join Date
    Jan 2007
    Location
    Pleasanton, Ca.
    Posts
    3,481
    Quote Originally Posted by twofastdogs View Post

    Greyhounds, yes. I figure that I've had a dozen or so through my place. Three adopted and the rest were fosters. At one time, I was dating a woman and each of us had two Hounds. Spending the weekends together, the houses got a bit...crowded. But everyone got along well.
    -K
    I love the temperment of the large sighthounds! We've had 9 Afghans. Similar build to the Greyhound except beefier lower legs and feet. And LOTS and LOTS of grooming.

    With the large sighthounds you need a big yard, a big sofa, and a big bed!!! We had 3 at one time and I used to go into the bed stores and ask "What do you carry that is about twice the size of a king size?" If we didn't get into the bed first, we were SOL!

    My wife is getting a bit burnt out from the grooming after 30+ years, so our next one may very well be a Greyhound.



    LONG MAY YOUR BRICK FLY!

    Ride Safe, Ride Far, Ride Often

    Lee Fulton Forum Moderator
    3 Marakesh Red K75Ss
    Mine, Hers, Spare

  8. #8
    Registered User
    Join Date
    Apr 2014
    Location
    Twin Cities
    Posts
    13
    Quote Originally Posted by 98lee View Post

    Let me know if you need photos. I might be able to get you some in the next couple of days.
    Pictures would great, or if anyone has a diagram that shows it.

    Thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •