bob_m
Active member
I just replaced an loud but stylish Luftmiester 2 into 1 exhaust system with a quieter Keihan system. The Keihan looks great, the sound is much more civilized and the fit is generally excellent, HOWEVER I have a conflict with the brake pedal. The inside curve of the pedal rubs against the pipe enough that the brake light stays on. I am far from the original owner and would not be surprised if the bike had fallen over on the right side. There is has been no indication of a crash that might bend the brake pedal, the bodywork fits well, and no repairs were noted during the repaint and the pedal itself looks to be undamaged.
Has anyone else had this issue. It looks like removing about 1/8" of material from the inside curve of the pedal would fix the issue, but I am not real enthusiastic about hogging out that piece.
Has anyone else had this issue. It looks like removing about 1/8" of material from the inside curve of the pedal would fix the issue, but I am not real enthusiastic about hogging out that piece.