• Welcome, Guest! We hope you enjoy the excellent technical knowledge, event information and discussions that the BMW MOA forum provides. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please click the 'Log in' button above and enter your BMW MOA username and password.

    If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the discounts and benefits the BMW MOA offers?

  • Beginning April 1st, and running through April 30th, there is a new 2024 BMW MOA Election discussion area within The Club section of the forum. Within this forum area is also a sticky post that provides the ground rules for participating in the Election forum area. Also, the candidates statements are provided. Please read before joining the conversation, because the rules are very specific to maintain civility.

    The Election forum is here: Election Forum

frozen locks on 2012 RT

ken e

Ken
Winter in the mid Atlantic state of Virginia, it's frequently above freezing during the day and below freezing in the early morning when I have to go to work.
Bike sits outside at work, then sits in an un-heated garage at night. With the rain then cold, have had ignition, gas, and saddle bag locks freeze up.
When rain is forecasted (and I remember), I put a 2" ID mailing tube cap over the ignition when parked outside.
Other morning, had a frozen ignition. With a syringe, injected isopropyl alcohol and worked it a few times. It freed up and rode to work.
Any other tips or tricks to keep water out of the locks?
Thanks in advance.
 

Attachments

  • ig cap on_1.jpg
    ig cap on_1.jpg
    38.2 KB · Views: 86
Spray WD-40 into the locks once in a while. Use the supplied red tube to get the WD-40 into the locks.
 
Back
Top