Page 1 of 5 1 2 3 ... LastLast
Results 1 to 15 of 72

Thread: 2014 R1200RT Press Release

  1. #1
    Registered User
    Join Date
    Nov 2011
    Location
    Peoria, AZ
    Posts
    13

  2. #2
    Registered User Firenailer's Avatar
    Join Date
    Feb 2010
    Location
    Westchester, N.Y.
    Posts
    319
    Wow! I love my 2012, but damnit I want that bike!
    Ride Safe,
    Bob
    '12 R1200RT

  3. #3
    Registered User Motodan's Avatar
    Join Date
    Dec 2007
    Location
    Midwest
    Posts
    1,312
    The engine should be a step forward, but I personally don't care for the elongated center headlight. Note they went back to the more integrated (all black) brake reservoirs. Perhaps more chances for electrical glitches? Those marketing girls and boys sure know how to pen flowery words Guessing at price....ad price should be about $17,995.00.....with options, that 90% of people would want and shipping, say around $23,285.00 and if you want the full boat $24,482.00. Just guessing. Oh, and oil filters will stay same price, but new handlebars for those who want to reduce the reach, will be $873.23 (aftermarket).
    MOA #46783
    2015 R1200RT

  4. #4
    Registered User wyman.winn's Avatar
    Join Date
    Jul 2013
    Location
    Solvang, CA
    Posts
    213
    maybe i should've waited to by my RT......nope...will trade her in when she reaches 100K miles....at the rate i am going (10k miles in 4months) that wont be too long....and the bugs should be worked out by then....i'll give it a couple of years...

    nice press release though....

    love my RT.....
    2013 R1200RT - Sassy - Fluid Grey Metallic
    2002 V-Strom DL1000 - sold
    2008 KLR650 - sold

  5. #5
    Registered User
    Join Date
    Sep 2003
    Location
    Virginia Beach
    Posts
    726
    Guess I'll have to trade in my '11 RT...
    Virginia Beach
    current:14 R1200RT 75 R60/6
    past: 11 R1200RT 10 R1200RT 03 R1200CLC

  6. #6
    Registered User
    Join Date
    Sep 2008
    Location
    Wilmington, NC
    Posts
    2,127
    Well there is certainly a lot to like in the spec-many of the complaints about previous models have seen changes though it remains to be seen how effective they are (eg mirrors, screen glare angle, etc etc) No doubt the usual accessories will still be needed for individualized comfort.

    The lowered seat raises the issue of knee angles and ability to lower pegs if wished without dragging metal. Reach to bars is most always an issue on BMWs so ability to relocate without big $ remains to be seen.

    I have never been a fan of any German ASC or any type of skid control I've ever seen and I've been a track instructor including BMW and Merc car clubs for a long time. They are nanny intrusive without exception so far. And I've never encountered a real need for such on a street machine of any type though I recognize some folks like this stuff. The fact that ASC cannot be switched off in any mode, even Dynamic, is a clear negative to me and the idea that one has purchase that option to even get close to getting rid of it without cutting wires is equally unappealing. Maybe I'll be pleasantly surprised by the new bike.

    Hill Control should appeal to noobs and infrequent riders though the new clutch type won't stink up the road if you slip it a bit, unlike the old one.

    Not sure what to make of the new cases yet but they should be a bit better.

    Am very skeptical of the stated reason for the increased centrifugal masses- I rather suspect this has been done to address some identified problem with the GS rather than just for improved smoothness- but I'd sure like to be wrong about that. The gearing and power curve changes sound like an improvement- all prior boxers from oilheads on badly need low end fueling improvements to correct power curve flat spots and the torque curve widened. Finally after many years of these bikes being on the market a simple device exists to fix it for past models- the AF-XiED sold by Beemer Boneyard. It would be nice not to have to think about that with the new model. Hope they have got it better than previous. (There is a big difference between a machine that runs smoothly and one that runs smoothly with optimal performance)

    The designs seems to promise the maintenance and repair improvements of the wethead GS- that's all good.

    Looks like since they couldn't do it in the last big war are still trying to kill us all but with dull colored bikes invisible in all but perfect light. We've got a grayish shade of blue, a grayish shade of black and of course pure gray. Last time I was there, fun drunks still showed up in Germany periodically- is their normal soul really all gray, conformist, and boring? At least in Bavaria it didn't seem to be...Yuck to the color range, not bad individually but there's not 5% difference between them all. This is the bike equivalent of "They all look alike to me".

    I won't be first couple years buyer but will test ride. My 06 K1200GT has shown me all I ever want to learn about how badly the factory gets some things, sometimes, in their intro despite good intentions. Hope this one is glitch free enough that it is an obvious choice as my 08 RT ages out. Switches that work without ice water would be a great start to improving on other recent stuff. (Electrical stupidity is not unique to BMW- my VW is in the shop today for the 3rd attempt at fixing a dead low beam and is getting a redesigned bulb holder that cannot keep an electrical contact- the original only has to grab onto the bulb prongs and make two contacts in the headlight housing yet - no moving parts -couldn't even do that)

    There needs to be adequate factory shielding on the rads- the GS rads are way too big and exposed to expect they'll be OK without something on them and the overpriced German aftermarket accessory shields should not be needed. I've got an 89 Honda Transalp that has 2 layers of protection in front of its rads from the factory and you would have to basically destroy the bike to wreck a rad. There is no mystery about how to protect them and it should not be an aftermarket option.

    And of course many of us will be looking to see if ALL of the defects of the previous fuel containment and delivery system have been permanently fixed- from the fpc to the cracking female flanges and plastic male fittings that crack too easily, etc..At least it seems reasonably certain that EWS problems won't reappear any time soon..

  7. #7
    BruceRT
    Join Date
    Feb 2012
    Location
    Northern Virginia, USA
    Posts
    106
    I'll give BMW credit for doing Harley one better on performance add-ons. Harley sells replacements parts that increase the performance of the bike. BMW figured they could increase the profit margin by selling you a performance option that sounds like it is basically another setting for the electronics. I wonder if somebody will figure out a hack to enable "Ride Mode Pro."

    The optional Ride Mode Pro, meanwhile, includes the additional riding mode ?Dynamic? plus the Hill Start Control function. The sporty side of the new BMW R 1200 RT can be experienced to the fullest in ?Dynamic? mode. Instant throttle response, restrained intervention from the ASC and ABS and a firm damping set-up for the Dynamic ESA (when equipped as a factory option) let the bike unleash its full performance potential.
    Bruce
    2005 R1200RT (It's new to me!)
    Northern Virginia, USA
    If you are not continuously learning, you are slowly getting bored.

  8. #8
    Missin' my Dog vegasgsa's Avatar
    Join Date
    Jun 2013
    Location
    The NorthWet
    Posts
    69
    Last, but not least, the R 1200 RT has also been injected with added dynamism.
    Izzat like a turbo?

    Damn near like UnObtainium...
    Insert Witty Sig Line Here..
    '08 GSA..two tranny's, two driveshafts, too many headlights to mention..frame is broke..
    '10 798 GS

  9. #9
    Motorcyclist patiodadio's Avatar
    Join Date
    Sep 2005
    Location
    KY
    Posts
    746
    How does "Hill Start Control" work ?
    Maybe the looks will grow on me, but as of now I still like my 05 RT better. Can't wait to test ride the new RT tho.




    .
    ________________________________________
    The early bird might get the worm, but the second mouse gets the cheese.

  10. #10
    Registered User lkchris's Avatar
    Join Date
    Mar 2003
    Location
    Albuquerque, NM
    Posts
    4,951
    One magazine, I believe Rider, noted some unpleasant vibrations around 4k rpm with the new GS. This I'm sure would be totally unacceptable to long-time RT riders. I asked about it in a previous post in the Wetheads section, but got little response. IMHO probably the best single feature of boxers is their wonderful feel, which I refer to as massage. I know I haven't considered a BMW K for a nanosecond since the vibrating buzz bomb disasters that were the original versions. Given the volume of verbiage regarding vibration in the press release, I suspect this is what it's about.
    Kent Christensen
    21482
    '12 R1200RT, '02 R1100S, '84 R80G/S

  11. #11
    Registered User
    Join Date
    Sep 2008
    Location
    Wilmington, NC
    Posts
    2,127
    Kent. thanks for that info.

    Another reason to not rush into this model is waiting for it to be supported in the GS-911 or whatever its update is called. Many of us live too far from dealerships to want to depend on dealership computers for routine service resets. Doesn't matter so much if your dealer is a few miles away and either doesn't charge or charges minimally for service resets.

    I suspect Hill Start Control is going to introduce another possible failure prone electrical device and as a long time rider I can't get very excited about it. Even on NC steepest hills in the mountains it's only a modest nuisance to slip the existing clutch a little. Somehow one has to maintain the brake and coordinate its release with clutch use and throttle application- so something is obviously going to be automated control with some sort of relay and or motor circuit because you can't do it with just the parts on prior models. At least the failure of it isn't likely to leave you stranded unless its design somehow compromises use of normal controls.
    Last edited by racer7; 11-06-2013 at 02:39 AM.

  12. #12
    09 R1200RT JT_R1200S's Avatar
    Join Date
    Jun 2013
    Location
    Reno, NV
    Posts
    41
    I was hoping for 145HP...

    As far as the Gear shift assist my 2009 BMW boxer has a quick shifter, glad to see in 2014 the RT finally gets one

    I look forward to taking it for a test ride to compare it to my 09RT

    -JT

  13. #13
    Registered User 185274's Avatar
    Join Date
    Nov 2012
    Location
    North Potomac, MD
    Posts
    17
    Maybe it's just me - but two up looks rather cramped on this model.

  14. #14
    RT in NC
    Join Date
    Jun 2013
    Posts
    253
    I think both seating areas were extended a bit. But you sit lower in the bike.
    Buck in Greensboro, NC
    2013 R 1200 RT Midnight Blue - traded, 2014 R 1200 RT Ebony Metallic

  15. #15
    Registered User Alfred02's Avatar
    Join Date
    Feb 2012
    Posts
    106
    Love the looks and against my own initial intention, I will be one of the early adopters.
    Already talked to my local Vendor.
    Worse case scenario, if the changeover is too big, I will end up with a demo model.
    The only none compromise is that it will be a fully decked out bike or none.
    Australia N,S,W
    Mid North Coast
    2014 R1200RT LC/SE

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •