/5 32mm Bing Carb Stained from Simple Green?
So I have a carburetor body that I am working on rebuilding (replacing all parts o rings/etc with new).
So I disassembled the carburetor and soaked it in a 5:1 simple green solution.
Due to the simple green not being deep enough, it now looks like I have a water line.
Any idea how in the world to clean this off without using something abrasive? Is it corrosion? Kind of strange that it only happened right at the top "water line" of the simple green.
photo 3 (1).jpg
Would this be considered "varnish"? If so would B-12 chem tool remove it?
Note for next time, there is a Simple Green that is formulated for aluminum...
Otherwise, be fast and rinse thoroughly.
Thanks for the info. Definitely helps for next time, but I am more curious if the carbs is irreversibly corroded or not.
Originally Posted by beemerphile
Last edited by jbf; 10-03-2013 at 05:57 PM.
Try to use NevrDull and see if the marks come off.