Welcome, Guest! We hope you enjoy the excellent technical knowledge, event information and discussions that the BMW MOA forum provides. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please click the 'Log in' button above and enter your BMW MOA username and password.
If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the discounts and benefits the BMW MOA offers?
Beginning April 1st, and running through April 30th, there is a new 2024 BMW MOA Election discussion area within The Club section of the forum. Within this forum area is also a sticky post that provides the ground rules for participating in the Election forum area. Also, the candidates statements are provided. Please read before joining the conversation, because the rules are very specific to maintain civility.
Most shops have them.
Beware that the SS screws are NOT tappered like the OEM screws. This makes the initial threading and alignment of the screw moore difficult.
Good luck with'em.
Like PAS said just buff your stock ones. I chucked mine in a drill and used 600 grit wet sandpaper and then some good polish. The stock ones are a lot better than the aftermarket because of the taper and you know your putting the right length where it belongs.