Results 1 to 6 of 6

Thread: 02 1150rt stainless hardware kit

  1. #1
    Registered User
    Join Date
    Aug 2008
    Location
    Seacoast
    Posts
    12

    02 1150rt stainless hardware kit

    I'm looking to replace the black Allen head screws with stainless that attach the plastic fairings ..
    Ay idea where a kit could be purchased? Thanks

  2. #2
    Registered User PAS's Avatar
    Join Date
    Jun 2011
    Location
    N.E. Ohio
    Posts
    427
    The black fairing screws on my 03 RT are stock and are stainless. Remove the coating and buff them.

  3. #3
    Registered User
    Join Date
    Aug 2006
    Location
    Southern California
    Posts
    50

    SS Screws

    Most shops have them.
    Beware that the SS screws are NOT tappered like the OEM screws. This makes the initial threading and alignment of the screw moore difficult.
    Good luck with'em.

    http://www.ascycles.com/detail.aspx?ID=43466

  4. #4
    Registered User
    Join Date
    Feb 2012
    Posts
    8

    Buff em, Danno

    Like PAS said just buff your stock ones. I chucked mine in a drill and used 600 grit wet sandpaper and then some good polish. The stock ones are a lot better than the aftermarket because of the taper and you know your putting the right length where it belongs.

  5. #5
    Registered User
    Join Date
    Aug 2008
    Location
    Seacoast
    Posts
    12
    Thanks all, the heads are shot from so many removals, I will check it out , thanks

  6. #6
    Registered User Olsensan's Avatar
    Join Date
    May 2008
    Location
    Adirondaks and LI,NY
    Posts
    461
    I just spray painted mine with rustoleum glossy black and they look great 4 years later. Cost: $3.79, no shipping
    Last edited by OLSENSAN; 03-17-2013 at 10:41 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •