Results 1 to 5 of 5

Thread: 2012 R1200R Nav iV install...Where are the plugs in the wiring harness?

  1. #1
    Caribbean Druid
    Join Date
    Apr 2007
    Location
    Tampa, FL
    Posts
    607

    2012 R1200R Nav iV install...Where are the plugs in the wiring harness?

    Just to forestall the inevitable: I already went thru the tech library and didn't find an answer to this one...

    I'm going to have to install a Nav IV on a friend's new R1200R. The Nav IV comes with a pair of specific, white plugs on the end of the wiring harness, one male and one female. Does anyone know exactly where in the R1200R wiring harness they have buried the matching receptacles for the Nav IV plugs?

    Thanks!

  2. #2
    Registered User lkchris's Avatar
    Join Date
    Mar 2003
    Location
    Albuquerque, NM
    Posts
    4,951
    Kent Christensen
    21482
    '12 R1200RT, '02 R1100S, '84 R80G/S

  3. #3
    Caribbean Druid
    Join Date
    Apr 2007
    Location
    Tampa, FL
    Posts
    607
    Cool. Thanks!

  4. #4
    Registered User websterize's Avatar
    Join Date
    May 2009
    Location
    Frederick, Md.
    Posts
    59
    This is the connector on a 2011 or 2012 R12R. On the 2009 model, it's more buried. In the photo below, the connector (w/red wire) is zip-tied to the throttle-side frame under the fuel tank. Remove the cap, plug it in and your friend is ready to roll.

    Last edited by websterize; 01-01-2013 at 01:03 AM.
    Bill Webster
    2013 K 1600 GT
    2009 R 1200 R alumnus

  5. #5
    Caribbean Druid
    Join Date
    Apr 2007
    Location
    Tampa, FL
    Posts
    607
    Great! Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •