Additional taillights for the top case
I have wired up LEDs and they work fine. My plan is to have them light only when the bike is running. I thought that I had it wired up correctly, with a relay in the hot line to the lights and the switch wire going to the tail lamp. The odd thing is that the relay, without power (from the tail lamp) is allowing the new LEDs to light. Meaning that the relay seems to default to on. I know that I am hooking up the correct terminals. Does anyone have a how to or some suggestions to make this work? 2000 R1100R.
ETA, I updated the diagram with SedanMan's information in case anyone else wants it in the future.
Last edited by darkstar1; 11-25-2012 at 04:25 AM.