Some dealers offer discounts,
YES - 2005 model year
YES - 2006 model year
YES - 2007 model year
YES - 2008 model year
YES - 2009 model year
YES - 2010 model year
YES - 2011 model year (R1200R only I think..)
YES - Multiple fuel strip failures - please note model/year in a comment
NO - fuel strip failure. Please note year/model in a comment
My new bike didnt make it 30 miles before the strip failed. Will be dealer replaced during 6k inspection.
I just noticed this thread. I've had my 2007 R1200R since new, and have not experienced a problem with this part. 50,000 miles and slowing (due to buying a second bike in 2009). My 2009 F800GS likewise has not suffered a failure after 25,000 miles.
80,335 miles, no fuel strip failures. '05's rock!
I've had 5 strips fail if you include the one that failed on the bench while MAX's was calabrating it.
The first one was at about 34K Then just inside 2 years for each one after.
Fifth one just failed at just less than a year on my 2009 RT.
2009 BMW R1200RT
1970 Triumph Bonneville
Two strips failed. One at about 12k and one at about 23k. I wish someone would come up with a practical solution to make that part more reliable. All these frequent failures can't help the brand reputation. I've heard people say it is the alcohol in the U.S. fuel, and I've heard one person say heat causes the strips to fail. Perhaps BMW had hundreds extra of these strips made at $2 each, and there is a celebration in the parts sales department each time there is an out of warranty failure.
2009 RT replaced fuel strip in August 2012 with 22K miles
It just amazes me that according to the poll 60% of the voters have had one or more failures and there is not a group uproar aimed at BMWNA. Again I thank Don for putting this poll up so everybody can see how bad the situation is.
But heaven forbid that someone from the MOA contact BMWNA and find out what BMW is going to do about it. Let's just be a bunch of sheep and whine about it but don't dare ask anybody to hold BMW accountable.
I bet if your new Lexus was in the shop for a couple of weeks at a time and kept having the same problem over and over(even if it was covered by warranty) that you would be raising cane and would not ever consider buying another Lexus.
I feel for the fuel strip, final drive...... and others that have had to deal with BMW's lack of taking responsibility for the issue.
Sure problems happen in manufacturing and products fail. But BMW tries to blame it on ethanol, they knew we have ethanol in our gas and failed to manufacture a product that would work in a ethanol environment.
Nobody likes ethanol, but it is not ethanol fault, it is BMW's poor product design.
I am going to see what the dealer suggests now. I am also wondering if their mechanics have a clue as to what they are doing!
Mine just went out.