Anyone have suggestions on restoring a tool tray? I know it seems inconsequential. I've removed the old gasket and cleaned all the old adhesive off of the tray. Its got some scratches/dings/etc on it. Was considering wet sanding at least an initial coat to remove the lighter marks in the tray (and any left over adhesive) and then polishing it up slightly.
Has anyone do anything to (at the very least) bring the color/darkness back on their tool trays for an r75/5 at all?
Also there is a slight crack in the front of the tool tray. Was wondering if there was a reasonable way to fix crack so that it is not noticeable (without having to paint/etc)