Results 1 to 3 of 3

Thread: R1200GS fitting replacement foot pegs

  1. #1
    Registered User
    Join Date
    Jul 2012
    Location
    Ladera Ranch, CA
    Posts
    28

    R1200GS fitting replacement foot pegs

    Just about to replace my foot pegs on my R1200GS Rallye 2012.

    I cannot get the bolt out on the gear change side.

    Do I just need to jiggle it a bit more or does the gear change leaver need to come off?

    Thanks

  2. #2
    Registered User
    Join Date
    Mar 2011
    Location
    socal
    Posts
    577
    Mark and remove gear selector, when replacing you may want to rotate it counter clockwise a notch to match up with lower pegs

  3. #3
    On some bikes (my '05 for example) the shaft is marked and the slot in the lever is supposed to line up with the mark. There is supposedly a warning that says you shouldn't mis-align the lever. I don't know why.

    Maybe it's like the warning about not running the saddle with the front in the high position and the rear in the low position...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •