The gt on the end recived Z8's around 6K.OEM BT's come off.
I have 2011 r1200rt with 7600 miles on them, and need tires,and bmw calls the gtl and the rt touring bike,
K1600 GT new 6/10/11.
14k mi so far. This Bike chews up tires! It's the price you pay for a 700 lb motorcycle that carves like a superbike. Gotta pay to play
On 4th set of rubber.
BT's - 3K max front went first. Least favorite tire so far
2 sets of Z8's - 4k and done, Fronts go first
on PR3's now - looks like it will make 4k also no more.
PR3's in my opinion, stickiest and best carving canyons. Better in rain.
'14 KTM 1190 Adv
'15 GSW Adv
PR3's installed on another 1600GT.
To bad we found bent front rim, I hate to be the guy who gives bad new to costumer.
Water pump leak is another story (this issue should be covered under warranty)
As already posted in another thread: 2012 K1600GT, right now at 5,600+ miles, 2012 riding season over. Still on good front and rear tire ( I am running 42PSI) and the original water pump with no problems.
OK, an update on my K1600GT tire wear. I wore the OEM 'stones down to the wear bars in about 3100 miles running them at 42/42 with even wear. I then installed PR3s and have 5,000 miles on them with another 32nd or two of rubber left before the wear bars. These tires have got some long highway miles on them punctuated by a number of days pushing them hard through the twisties. I've also settled on a happy place with slightly lower pressures. If I'm out in the hillbilly twisties for a while I like to run them down at 38/38 and get excellent grip and this leaves maybe 1 or 2 mm or wanker strips on both ends. I'm not a kneedragger on the street but do move my weight inside. Normal inflation for commuting and big trips that involve a lot of highway: 40 rear, 42 front. The bike handles lighter in the parking lot and around in general at lower speeds with those pressures. Even wear with no cupping on either end.
I would not hesitate to put these PR3s back on my bike which I'll probably do in the next month or so of riding.
2012 K1600GT, Vermillion Red (for the epic road trips)
2013 S1000RR, Granite Gray (for the track)
2014 KLR 650, White/Black (for the TAT)
I ride fairly conservatively on my 2011 GTL and got a bit over 20,000 km out of the OE Metzler's. They were very worn when replaced. Rear had cord showing, front was badly cupped - see photos. I've replaced them with PR2's but because it's winter, the bike's in storage right now so can't compare tire life for both types yet. IMG-20121102-00023.jpgIMG-20121102-00026.jpg
I was experiencing what felt like tar snakes when I was cornering or simply changing lanes swiftly. The other day I was taking off from a stop light into a left turn and my front tire slipped. It was a typical takeoff to the left and my lean angle wasn't too steep for my speed. There was no debris or oil in my path. I almost washed completely. I stopped and checked pressure and for any abnormality. The only thing I noticed was the flattened ridge in the center of the tire with what looked like oblong bubbles. I've never seen this in a tire and I've worn many to the cords. I remember not loving these tires on my K1300GT either....Swapped em out for P3s and I was in heaven. Looks like I'm prematurely mounting P4s.
Own: '13 K1600GT & '95 K75
Owned: R1200GSA, GS & K1300GT
2500 miles OEM tires, didn't like them
6000 miles on two successive pairs of PR3's, great tires, changed early because of planned rides
Currently PR4's with 2500 miles, excellent tires also, my guess good for 7000 plus miles
Original Metzler's made it to 7800 miles, with cords showing through on the rear tire. Put on a new set of Metzler's, but was leaving NC for Alaska in June and wanted something that "might" last the whole trip, or at least get me back to Seattle. Tried to get the Michelin PR 4, but it was back ordered. Went with the Bridgestone BattleAx. Had the rear changed in Anchorage with 8000 miles on it. Replaced the BattleAx with a Michelin PR 4. Maybe could have gotten another 1000 miles out of it, but that would have left me stranded somewhere on the Cassiar Highway. Had the front tire changed when I got back to Seattle with 11,000 miles on it. Also went with the Michelin PR 4. I now have almost 10,500 on the rear PR 4 and it still looks great. Front has almost 8000 on it and looking good.
My choice - Michelin PR 4
GTL, PO changed to PR3s at 5,500 miles, not sure why. I got 11,000 out of that set. 6,000 miles so far on PR4s and plenty of life left but definitely have some cupping going on as I have a tendency to charge corners and brake hard. I ride solo, 1 helmet + luggage, 40 front/42 rear. I use the sides of my tires as well as the center, but don't get to the edges very often.