Results 1 to 9 of 9

Thread: K1200RS mirrors on 2007 R1200RT

  1. #1
    flylow1
    Guest

    K1200RS mirrors on 2007 R1200RT

    I just added these mirrors to my RT and they are a perfect fit from a pure fit perspective and styling as well. I haven't ridden with them yet but they appear to eliminate the 6:00 blind spot with the stock mirrors while the 49 liter top case is on which it always is for me.

    I will ride soon with them and will report on visual performance. I wonder how much wind noise these will generate but I suspect I won't notice.

  2. #2
    Registered User greenwald's Avatar
    Join Date
    Dec 2006
    Location
    Sheboygan, WI
    Posts
    3,520

    Smile

    I think you will like them.

    Many of us got tired of staring at our knuckles and elbows out of the stock mirrors, and added a pair of these to our RT's.

    I appreciate my restored visibility to the rear, and notice no additional noise.

    Enjoy.
    Kevin Greenwald - MSF RiderCoach # 121656 (BRC,SBRC,IS,IME,SMARTrainer)
    Nationally Certified Law Enforcement Motor Officer (Ret.) / IBA Member #34281
    Motorcycle & High Performance Driving Instructor - ROAD AMERICA Race Track

  3. #3
    Registered User
    Join Date
    Feb 2007
    Location
    Central NJ
    Posts
    34
    The KRS mirrors were the first farkle I added to my RT. Huge difference.
    Marty
    O6 RT, 03 F650GS

  4. #4
    Rally Rat RTRandy's Avatar
    Join Date
    Feb 2004
    Location
    Dallas, Texas
    Posts
    1,587
    You can also go the less expensive route and use GS mirrors. The down side is your RT will look like its spotin Mickey Mouse ears plus they vibrate. The RS mirrors have far less vibration.

  5. #5
    Ed Kilner #176066
    Join Date
    Nov 2011
    Location
    Mississauga, ON
    Posts
    490

    More info please

    Quote Originally Posted by flylow1 View Post
    I just added these mirrors to my RT
    Did you have to buy an adapter for the bars? Which ones? What was the cost of the parts?

    Any photos?


    And, anyone can reply of course...
    Ed
    2011 R1200RT Thunder Gray Metallic; 2000 Triumph 900(sold)
    http://triumphantsblog.blogspot.ca/

  6. #6
    flylow1
    Guest
    nice visibility behind with these and there is no noise that I can tell. I got them from MaxBMW and with shipping and the nuts/washers it came to about $194. No adapters needed as these fit the bars perfectly.

  7. #7
    not so retired henzilla's Avatar
    Join Date
    Sep 2006
    Location
    between SanAntone & the Weird Place, TX
    Posts
    6,251
    Quote Originally Posted by BMW Triumphant View Post
    Did you have to buy an adapter for the bars? Which ones? What was the cost of the parts?

    Any photos?


    And, anyone can reply of course...
    A previous thread with pictures and part numbers. Fit in stock holes, no adapter on pre-2010. There is also discussion of 2010 and newer models that use a different bar clamp.

    http://forums.bmwmoa.org/showthread....ght=RT+mirrors
    Steve Henson
    SABMWRA MOA Club#62's Flat Fixer/ current forum moderator
    It's not the breaths you take, but the moments that take your breath away-D.Dillon/G. Strait

  8. #8
    Registered User greenwald's Avatar
    Join Date
    Dec 2006
    Location
    Sheboygan, WI
    Posts
    3,520

    Thumbs up

    Quote Originally Posted by BMW Triumphant View Post
    Did you have to buy an adapter for the bars? Which ones? What was the cost of the parts?

    Any photos?


    And, anyone can reply of course...
    http://www.ascycles.com/detail.aspx?ID=1792

    Here is a source for the mirrors I added to the RT. Great view to the rear and I readjusted the OEM's for a different perspective.

    Now have four mirrors looking backwards.

    So, you're looking at about $170 plus shipping.

    The holes already exist on our handlebars (pre-2010 models!), so install takes about 2 minutes per side.
    Kevin Greenwald - MSF RiderCoach # 121656 (BRC,SBRC,IS,IME,SMARTrainer)
    Nationally Certified Law Enforcement Motor Officer (Ret.) / IBA Member #34281
    Motorcycle & High Performance Driving Instructor - ROAD AMERICA Race Track

  9. #9
    Ozzie Flyer
    Join Date
    Mar 2010
    Location
    Brisbane, Queensland, Australia
    Posts
    165

    Smile

    Hi
    Hope they are as good as you say. Just pulled the pin and ordered a set for my 2008 RT. always been something that needed improvement. Now I just hope they arrive in OZ within 2 weeks before my trip.
    Regards
    Paul
    regards
    Paul
    Ozzie Flyer
    BE KIND TO HUMANS... THEY BITE

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •