roger 04 rt
New member
Here is the final mounting of the Aeromotive 13301 adjustable fuel pressure regulator that I used to richen Open Loop fueling 10% (20% increase in pressure to 53.5 psi).
It is mounted to the frame using an included mounting bracket, on the right hand frame near the alternator. (I misread the torque value and broke the bolt which led to having to drill it and back it out.)
The mounting bracket is soft steel and was easy to twist with a vise and adjustable wrench. You can see the fuel line routing in the photo below. After taking the photo I realized that I could attach the battery vent hose (no longer needed with the Odyssey battery) to the regulator atmospheric vent.
It is mounted to the frame using an included mounting bracket, on the right hand frame near the alternator. (I misread the torque value and broke the bolt which led to having to drill it and back it out.)
The mounting bracket is soft steel and was easy to twist with a vise and adjustable wrench. You can see the fuel line routing in the photo below. After taking the photo I realized that I could attach the battery vent hose (no longer needed with the Odyssey battery) to the regulator atmospheric vent.