• Welcome, Guest! We hope you enjoy the excellent technical knowledge, event information and discussions that the BMW MOA forum provides. Some forum content will be hidden from you if you remain logged out. If you want to view all content, please click the 'Log in' button above and enter your BMW MOA username and password.

    If you are not an MOA member, why not take the time to join the club, so you can enjoy posting on the forum, the BMW Owners News magazine, and all of the discounts and benefits the BMW MOA offers?

How do you clean your riding gear?

I've washed all my textile gear in my Maytag front loader. I remove the armor and give the really grungy spots a good saturation of Spray N Wash/Resolve. I use "regular" detergent and warm water. Extra rinse, I hang it up to dry, then put the armor back in.

I don't have waterproof gear, use a rainsuit, so waterproofing isn't really an issue for me.

P
 
+10000 for Nik Wax and Grangers and front load washers

My Roadcrafter gets washed once a year.

For spot cleaning I use an industrial orange cleaner and a stiff brush. Oxy Clean works well, too.

Spot clean first, then run through an entire cycle (with no soap) to make sure all the cleaner is off. (jacket first, then pants)

They each get their own turn in the washer with NikWax or Grangers. because I ride in the rain a lot, before I stick it in the dryer I give them a good coating of the spray on water proofing (Nik Wax product works best for that).

Into the dryer until dry. Armor pads go back in, and then all the junk goes back in the pockets, boots get scrubbed and re-waterproofed, helmet liner comes out and gets hand washed with Woolite. Gloves get re-waterproofed with NikWash glove spray.

Then I patiently wait for the snow to melt. ;)
 
smelly palms

I agree with the minority of responses above and break out the 'cred' excuse when I get really lazy! However, I do have one problem I haven't been able to fix yet... Smelly gloves - not from sweaty palms but from mildew - guess they took just a little bit too long to dry one wet day. :cry They are the 'multi' leather bmw Rallye 2 glove... nothing seems to work. Any suggestions?
 
For any of you who might be feeling guilty in not having recently washed your riding gear, consider that Edmonton student Josh Le wore his Nudie jeans almost every day for 15 months, and slept in them for a month, without washing them. Then he and assistant University of Alberta human ecology professor Rachel McQueen swabbed the inside of the jeans and tested them, they found levels about the same as from jeans that had recently been washed.

http://abcnews.go.com/US/canadian-student-josh-le-year-washing-jeans/story?id=12722442

Speaking for myself, I feel better already. :)
 
For any of you who might be feeling guilty in not having recently washed your riding gear, consider that Edmonton student Josh Le wore his Nudie jeans almost every day for 15 months, and slept in them for a month, without washing them. Then he and assistant University of Alberta human ecology professor Rachel McQueen swabbed the inside of the jeans and tested them, they found levels about the same as from jeans that had recently been washed.

http://abcnews.go.com/US/canadian-student-josh-le-year-washing-jeans/story?id=12722442

Speaking for myself, I feel better already. :)

Field dressing a gut shot deer is less disgusting than what you just described....:sick
 
Last edited:
For some reason I'm like Pigpen - I seem to get dirtier than everyone else....? I wash my Olympia stuff in the washer with armor in - I've found taking it in and out tears it up. I pre scrub the bad spots with dishwashing liquid (Dawn takes grease outta your way!) - it's cheap and works really good - then I usually hang dry just because I need every millimeter of length I can get.

Deb
CO
 
Washing riding gear

I have a 7 year old First Gear Kilimanjaro jacket that I wash in a top loading washing machine, after removing the armour, with regular detergent at least twice a riding season. I have scrubbed the extra grubby parts using 'Resolve' and a soft brush...let it rest for an hour or two then washed it. I use extra fabric softener in the rinse and hang to dry. It still sheds the rain very nicely. My Joe Rocket perforated leather and textile Reactor jacket gets the same treatment and looks pretty good for being 6 years old. The reflective parts still reflect and it does not shrink in size.
 
There is one riding jacket I have that for the life of me I can't get the Armour out... and if I do I am afraid I won't get it back in. I have always been "afraid" to wash the gear with the Armour thinking it will ruin the Armour per what I was told by a dealer. Does it ruin the Armour when you leave it in when you wash your riding gear?

The other gear I have washed I have taken the Armour out and it seems as though I have ruined an Armour piece by doing so or perhaps it was defective... the company did replace it with no problem and claimed they never heard of it happening before...

Should I be afraid of washing the gear with the Armour in? A jacket could really use a washing. LOL

I also have a front loader too.

Thanks.
 
washing riding gear

What I want to know is whether or not the riding coats and pants are still as waterproof after washing as before. I've got a Kilimanjaro coat and First Gear pants that have not leaked once while riding in Oregon's Northwestern rain (about 6 months out of the year) and they're six years old. Everyone I've spoken with who washes their riding gear sprays a waterproofing material on them after they've been washed. Every one of them gets wet when we ride all the day in rain. I don't. I think I'll just leave it all the way First Gear treated it.

No one has mentioned leathers. I now prefer my textile outfit because it's lighter in weight. Heck, I'm 67 next month and all that leather gets heavy! For years I wore Langlitz Leathers made right here in Portland. Obviously never washed it. About every three months I'd treat it with their leather dressing. After 20 years the pants finally started to get damp in the crotch after an all day ride because the needle holes finally stretched the leather enough that the dressing couldn't fill them properly. The coat, however, (now over 25 yrs old) still doesn't leak. If I'm not going to be walking very much I often wear the First Gear pants and the leather coat.

Karl
 
I agree with the minority of responses above and break out the 'cred' excuse when I get really lazy! However, I do have one problem I haven't been able to fix yet... Smelly gloves - not from sweaty palms but from mildew - guess they took just a little bit too long to dry one wet day. :cry They are the 'multi' leather bmw Rallye 2 glove... nothing seems to work. Any suggestions?

I'd recommend a Peet dryer. I comes with attachments for shoes/boots. Available are attachments for helmets and gloves. Mine cost somewhere under $40.00 sans attachments. Dry shoes in particular are a real joy. Perspiration is my main enemy and the Peet dryer works well for me.
 
I power wash my riding gear using just water. Easy to do and fairly effective in removing the grime. I douse them with NikWax and they remain water resistant.
 
Where I live there exists 'sports wash centers' that utilize special washing systems (built like inside-out front load washing machines) that hold the equipment stationary (no damage from parts banging against each other) and move the water/cleaning solution around the gear. These systems are also used by pro sports teams and Fire/EMS because the ability to clean, disinfect and sanitize very well and do comply with guidelines for specialised protective equipment (NFPA 1851 standard). I toured the local facility and was very impressed as they were 'washing' a motocross suit along with boots, gloves and helmet! The leather parts came out soft as a babies bottom and the synthetics were nice and clean with no odor at all. The one point I forgot to ask about was whether the cleaning agents were also friendly to Gortex or like water-proof gear. My plan is to try this out when my gear is at a point I can't live with it any longer; likely at the end of this season. because I am in Canada many people are familiar with it via cleaning their kids hockey gear which parents pay a lot of $ to acquire and want to ensure it lasts as long as possible.
 
Where I live there exists 'sports wash centers' that utilize special washing systems (built like inside-out front load washing machines) that hold the equipment stationary (no damage from parts banging against each other) and move the water/cleaning solution around the gear. These systems are also used by pro sports teams and Fire/EMS because the ability to clean, disinfect and sanitize very well and do comply with guidelines for specialised protective equipment (NFPA 1851 standard). I toured the local facility and was very impressed as they were 'washing' a motocross suit along with boots, gloves and helmet! The leather parts came out soft as a babies bottom and the synthetics were nice and clean with no odor at all. The one point I forgot to ask about was whether the cleaning agents were also friendly to Gortex or like water-proof gear. My plan is to try this out when my gear is at a point I can't live with it any longer; likely at the end of this season. because I am in Canada many people are familiar with it via cleaning their kids hockey gear which parents pay a lot of $ to acquire and want to ensure it lasts as long as possible.

Canada is so freeking civilised! :laugh
I am having laundry envy.
 
I had my coffee thermos in my pannier and the stopper was a little loose,so some of it leaked out.Fortunatly i had my heated liner in there to soak it up.Instructions say to hand wash and line dry,so ....i...wore...it..in..the...shower.Cindylu came in and looked at me then slowly backed out of the room.Hung it up to dry overnight and iy looks and smells like new.Ed
 
I have a 7 year old First Gear Kilimanjaro jacket that I wash in a top loading washing machine, after removing the armour, with regular detergent at least twice a riding season. I have scrubbed the extra grubby parts using 'Resolve' and a soft brush...let it rest for an hour or two then washed it. I use extra fabric softener in the rinse and hang to dry. It still sheds the rain very nicely. My Joe Rocket perforated leather and textile Reactor jacket gets the same treatment and looks pretty good for being 6 years old. The reflective parts still reflect and it does not shrink in size.

You put your leather jacket in the washing machine?

A note about fabric softener...it blocks up the gear that is supposed to be breathable so it may not be good for goretex items and tech wear shirts.
 
Yes I do wash my leather jacket and it looks very good for being so old. You make a good point about the fabric softener. Fortunately this ancient Kilimanjaro Jacket was not made of Goretex or a breathable fabric.

Our riding season up here in Ontario Canada has pretty much come to an end. There were some snow flurries this afternoon. BRRRRR.
 
Rather than all the home remedies, why not products made for the job?
 

Attachments

  • Image3.jpg
    Image3.jpg
    19.5 KB · Views: 50
Back
Top