Hello; I looked over the Canadian Tire winter sports cacalogue, on Page three they list heated grips you can install yourself. I ordered the kit and recieved it yesterday. It includes two heater elements a resister harness and a three position switch. I thought I would take power from my voltmeter, which turns off when the key is removed. Thesse were designed for use on snowmobiles which don't have a twisting throttle grip. Waht I had hoped to do was to have teh wires coming out of the grips to the outside, then run the wires through the bars to come out at the centre, then make all the connections under the instruments, and mount the switch on the dashboard of the fairing, then put the grips back on over the elements.
I haven't started on this yet, and wonder if there is anyone here that might have done this already. Any help will be appreciated.