• Welcome Guest! If you are already a member of the BMW MOA, please log in to the forum in the upper right hand corner of this page. Check "Remember Me?" if you wish to stay logged in.

    We hope you enjoy the excellent technical knowledge, event information and discussions that the BMWMOA forum provides. Why not take the time to join the club, so you can enjoy posting on the forum, the club magazine, and all of the discounts and benefits the BMWMOA offers?

    Want to read the MOA monthly magazine for free? Take a 3-month test ride of the magazine; check here for details.

  • NOTE. Some content will be hidden from you. If you want to view all content, you must register for the forum if you are not a member, or if a member, you must be logged in.

Heated grip connector question

174713

New member
I replaced a failed aftermarket heated grip switch with the OEM switch. The OEM switch came with a standard molded plastic female connector which I'm trying to connect to the old wiring which has no connector. The female connector internal pins are smaller than anything I can find at Radio Shack, does anyone have a source for molded plastic male connector or very small male pins I can solder onto the old wires for plugging into the female connector?Thanks for any advice.
 
Unfortunate that this was moved from Airheads section which I'd assume is the bike. Anyway, look first through the BMW parts system.
 
Back
Top